38 www.kodak.com/go/support
Doing more with your camera
Changing P, A, S, or M mode settings
PASM modes control the aperture (f-number, also known as f-stop), shutter speed,
exposure compensation, and ISO. Use the Menu button to control all other settings.
1 Turn the Mode dial to PASM.
2 Press to choose P, A, S, or M.
3 Press to move between settings, open a setting, or change a setting.
4 Take a picture.
Aperture—(also known as f-stop) control the size of the lens opening, which
determines the depth of field.
■ Smaller f-stop numbers indicate a larger lens opening; for portraits and low-light.
■ Larger f-stop numbers indicate a smaller lens opening; keeps the main subject
sharp; for landscapes and well-lit conditions.
Shutter speed—control how long the shutter stays open. A shaking hand icon
warns of slow shutter speeds. (Use a tripod for slow shutter speeds.)
Exposure Compensation—adjust the exposure; for controlling backlit or
non-standard scenes. If a picture is light, decrease the setting; if it’s dark, increase it.
ISO speed—control sensitivity to light. If you can’t use a flash, increase the ISO.
3200 available only at 1.2, 2.1, and 2.2 MP. Higher ISO can produce unwanted
“noise.”
Aperture
Shutter speed
Exposure compensation
White—selectable
Grey—non-selectable
Yellow—changeable value
Red—out of range
ISO
PASM Options
PASM mode
To Next Page
Loading...
Need help?
General
Weight and Dimensions
