Kodak EASYSHARE ZD710 User Manual

Transferring and printing pictures
www.kodak.com/go/support
49
Printing from a PictBridge enabled printer
1 Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu interface turns off, press any
button to redisplay it.
2 Press to choose a printing option, then press OK.
Current Picture—Press to choose a picture. Choose the number of copies.
Tagged Pictures—If your printer is capable, print pictures that you tagged for
printing.
Index Print—Print thumbnails of all pictures. This requires one or more sheets of
paper. If the printer is capable, choose a print size.
All Pictures—Print all pictures in internal memory, on a card, or in Favorites.
Choose the number of copies.
Image Storage—Access Internal/Card or Favorites.
NOTE: During direct printing, pictures are not permanently transferred or saved to the computer or printer.
To transfer pictures to your computer, see page 46. In Favorites mode, the current favorite picture is
displayed.
Disconnecting the camera from a PictBridge enabled printer
1 Turn off the camera and printer.
2 Disconnect the USB cable from the camera and the printer.

Kodak EASYSHARE ZD710 Specifications

General

Megapixel	7.1 MP
Sensor type	CCD
Image stabilizer	Yes
Image sensor size	1/2.5 \
Digital zoom	5 x
Optical zoom	10 x
Digital SLR	No
Minimum RAM	128 MB
Camera shutter speed	1/2–1/2000; 8-1/1000 s
Minimum storage drive space	200 MB
Minimum system requirements	USB
Compatible operating systems	WINDOWS XP OS + /INTERNET EXPLORER 6.0 +/MACINTOSH OS X 10.3 +/SAFARI 1.1 +
Focus	TTL
Focus adjustment	Auto
ISO sensitivity	80, 100, 200, 400, 800, 1600, auto
Internal memory	32 MB
Compatible memory cards	mmc, sd
Motion JPEG frame rate	30 fps
Video formats supported	QuickTime
Display diagonal	2 \
I/O ports	A/V NTSC/PAL
USB version	2.0
Product color	Black
Bundled software	KODAK EASYSHARE
Flash modes	auto, fill-in, Flash off, Red-eye reduction
White balance	auto, daylight, Fluorescent, Tungsten

Weight and Dimensions

Depth	72.6 mm
Width	97.8 mm
Height	77.5 mm
Weight	280 g