52 www.kodak.com/go/support
Troubleshooting
Picture orientation is
not accurate
■ Set the Orientation Sensor to ON (see page 34)
Flash does not fire
■ Open the flash unit.
■ Check the flash setting and change as needed (see page 9).
NOTE: The flash does not fire in all modes.
Storage location is
almost or entirely full
■ Transfer pictures to the computer (see page 47).
■ Delete pictures from the card (see page 16) or insert a new card.
■ Change image storage location to internal memory (see
page 33).
Battery life is short
■ Make sure the correct battery type is installed (see page 62).
■ Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■ Insert a new or charged battery (see page 2).
You cannot take a
picture
■ Turn camera off, then on again. Make sure the camera is not in
Favorites mode. If prompted, set language and date/time.
■ Press Shutter button all the way (see page 5).
■ Insert a new or charged battery (see page 2).
■ Wait until the AF/AE indicator turns green before attempting to
take another picture.
■ Memory full. Transfer pictures to the computer (see page 47),
delete pictures (see page 16), change image storage location
(see page 33), or insert another card.
Error message appears
on EVF/LCD
■ Follow the EVF/LCD prompts.
■ Turn the camera off, then on again.
■ Remove memory card from the camera.
■ Remove the battery and wipe the contacts with a clean, dry cloth.
■ Insert a new or charged battery (see page 2).
■ Get customer support help (see page 56).
If Try one or more of the following
To Next Page
Loading...
Need help?
General
Weight and Dimensions
