Quick Reference -- The ultimate reference for Kodak EKTAPRO Slide Projectors
22
by Kodak GmbH Stuttgart, PT CMS edition 1/2001 -QR-Epro.pm6.5
Soft Slide Change
(One Projector)
n Fading up and down (Soft Slide Change) with one projector via IR
Remote System
max.
30 m!
EKTAPRO
7020, 9020
IR Remote System RA
CAT No 712 1072
and RA/LP
CAT No 712 1064
IR Remote Receiver
CAT No 712 8606
Fading
avoids hard
light changes
during slide
transport!
○○○○○○○○○○○
Note
The Fading Mode must be set again after
projector has been switched off/on! If you
want to keep the setting, switch projector to
standby! Do not switch it off!
Input fade times of 0 sec (hard cut) up for
a long fade of 9.9 sec in increments of a
tenth of a second
Code: <801 - 899>
Example: 4 s
Input <840> and confirm with <*>
Fade Up: Set time via IR. Within this time lamp increases brightness!
Fade Down: Set time via IR. Within this time lamp decreases brightness!
To Next Page
Loading...
