EasyManua.ls Logo

Kodak EKTAPRO - Autofocus

Kodak EKTAPRO
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Quick Reference -- The ultimate reference for Kodak EKTAPRO Slide Projectors
26
by Kodak GmbH Stuttgart, PT CMS edition 1/2001 -QR-Epro.pm6.5
n Important Note for use of Autofocus
Autofocus
n Important
Use either glass or glassless (cardboard) mounted slides! Never
mix them!
n AF and Superslides
Use of Autofocus with 4 x 4 slides and 4 x 4 condensor is not
recommended. As the sides of the condensor are too smooth (not
grounded, IR radiation from the lamp can enter the condensor and
may interfere the IR detectors of the AF.
n AF and slide mount material
Some slide mounts consist of plastic material that allows the IR
radiation to pass through. As not reflected it will not be detected
by the IR sensor. The AF will not work properly. In this case you
need to replace these mounts.
Ektapro
5020, 9020

Other manuals for Kodak EKTAPRO

Related product manuals