Quick Reference -- The ultimate reference for Kodak EKTAPRO Slide Projectors
6
by Kodak GmbH Stuttgart, PT CMS edition 1/2001 -QR-Epro.pm6.5
34. Q: How bright are the projectors actually? PAGE 37
Remote Control
35. Q: Although the IR remote control is supposed to reach a 30 m range, I get no response at
10 m. Why is that? PAGE 11
36. Q: The range of the IR remote control (of 30 m) is not sufficient for my application. Is it
possible to extend the range? PAGE 11
37. Q: The premises are so adverse that I cannot aim directly at the projector from the lectern. Is
it possible to place the receiver somewhere else? PAGE 11
38. Q: Is it possible to operate two IR systems in one room? PAGE 13
39. Q: Is it possible to control two projectors individually with one IR transmitter? PAGE 13
40. Q: Can an IR remote control be connected to the twin socket adapter instead of the cable
remote? PAGE 15
Lenses
41. Q: Long focal distance lenses have the disadvantage that the projected image moves e.g.
during slide change. Is there a solution? PAGE 31
42. Q: Why can’t all lenses be used for 4x4 projections? PAGE 33
43. Q: What is the difference between EKTAPRO Standard and Select lenses? PAGE 29
Miscellaneous
44. Q: For a special application I would like to turn off the ”No Slide No Light” feature. The
projector aperture should remain open if no slide is in the slide gate. Is that possible?
PAGE 27
45. Q: What is fade in/out? How do I activate this on my projector? PAGE 22
46. Q: I would like to get a longer dissolve cable for my Master/Slave application (dissolve with 2
EKTAPROs). Can I use an ordinary RS232 extension cable? PAGE 65
47. Q: Is it possible to get the images on my computer onto slide material?
PAGE 28
48. Q: I would like to build the projector into a special rack/furniture. Are there any specified
fixing holes? PAGE 54
49. Q: To eliminate fan and slide change noises, we would like to build the projector into a noise
insulation. What do I need to consider? PAGE 54
50. Q: Before starting my multivision show I need to adjust the projectors accurately. Are there
any aids available? PAGE 55
To Next Page
Loading...
