26
3. Remove the film cassette from
the camera and reload with new
KODAK ADVANTIX Film.
• The FSI on the fully-exposed
film cassette is at ✖
(#3 position) and the
LCD panel flashes “E.”
UNLOADING THE FILM
Automatic rewind
The camera automatically rewinds
the film into the cassette after the
last exposure.
1. Wait for the film to completely
rewind into the film cassette.
• When the motor stops running,
the picture
counter (32) indicates “0.”
2. Push the film-door latch (16) to
open the film door (19).
4
3
2
1
To Next Page
Loading...
