Kodak FLIK HD9 - Projection Settings; Projection Modes and Zoom Control

EN | 15
PROJECTION SETTINGS
Press the Projector Settings button on the remote control and select “Settings”.
Then, select “Projection Settings” to get options like projection mode, keystone
correction, etc. Press the Home button at any time to exit back to the ANDROID TV™
homepage.
Projection Mode
Select between front projection, front ceiling projection, rear front projection, or rear
ceiling projection.
• Front: The projector is placed on a table in front of the screen. This is the most
common way to position the projector for quick setup and portability.
• Front ceiling: The projector is suspended upside-down in front of the screen. A
ceiling/wall mount kit is required (not included).
• Rear: The projector is placed on a table behind the screen. A special rear projector
screen is required (not included).
• Rear ceiling: The projector is suspended upside-down from behind the screen. A
special rear projector screen and ceiling/wall mount kit are required (not included).
NOTES:
For more control over projector height, you can place it on a tripod (sold separately).