26 A-61654/ISIS December 2009
Counter — if you want to add a Counter to the print string, you can
enter one of the following options:
• Field Width: used to control the width of the document counter.
Values range from 1 to 9.
• Format — allows you to configure the format of the counter when the
width of the value is less than the field width (the examples indicate a
field width of 3 and the counter at 4). Options are:
- Display Leading Zeros (default): “004”
- Suppress Leading Zeros: “4”
- Compress Leading Zeros: “ 4”
Top Margin — allows you to define the distance from the lead edge
before the print string begins. Enter the desired amount in the text box.
NOTE: Printing automatically stops 6.3 mm (1/4-inch) from the trailing
edge of the document even if the information has not been
completely printed.
Units — select Inches, Centimeters or Pixels.
• Font — you can select what orientation you want your information to
be printed.
- Style: available character styles: Normal, Large and Bold.
Rotation — you can select either 0 or 90 degrees.
Normal: 90° rotation Large: 90° rotation Bold: 90° rotation
To Next Page
Loading...
