2 A-61654/ISIS December 2009
Starting the Scan
Validation Tool
NOTE: The Scan Validation Tool is provided by Kodak and is a
diagnostic tool only. Kodak does not support the use of the Scan
Validation Tool as a scanning application.
1. Select Start>Programs>Kodak>Document Imaging>Scan
Validation Tool.
2. Select ISIS for the Driver Type and the KODAK i4200 (i4600) as the
driver and click OK.
3. Click the icon to enable the image view panels.
4. Click the Setup icon on the main Scan Validation Tool screen.
The Setup dialog box will be displayed.
To Next Page
Loading...
