10 A-61654/ISIS December 2009
Scan Area dialog box The Scan Area dialog box allows you to define the amount of image
data which is returned to the host.
NOTE: Select the Image Mode (either Normal or Merge) based on the
cropping option selected on the Main tab. If you select Normal,
select the side(s) (i.e., Front Image #1, Front Image #2, Back
Image #1 and/or Back Image #2) to be defined.
If you Select Merge, select the orientation of the merged images
(i.e., Front on Top, Front on Bottom, Front on Left or Front
on Right). The scan areas defined for all camera selections are
independent.
• Select Scan Area on the Layout tab to access the Scan Area dialog
box.
To Next Page
Loading...
