What to do if images are not being cropped correctly by Kodak scanner?
If the cropping options are enabled, Automatically Detect and Straighten or Automatically Detect, and your images are not being cropped correctly by Kodak scanner, clean the imaging area.
What to do if my Kodak scanner will not scan or feed documents?
If your Kodak scanner isn't scanning or feeding documents, ensure that: the power cord is securely plugged into both the scanner and the wall outlet; the power supply's green LED is lit; the power switch is turned on; the wall outlet isn't defective; the PC was restarted after software installation; and the document(s) are making contact with the feed rollers.
How to fix documents jamming or multiple documents feeding in Kodak i24x0?
To resolve documents jamming or multiple documents feeding in your Kodak scanner, make sure that: the side guides are adjusted to the width of your documents; the output tray is adjusted to the length of the documents; all documents meet the size, weight, and type specifications; the scanner and tires are clean; the spring on the pre-separation module is properly adjusted; and the feed and pre-separation modules are correctly installed. To remove a jammed document: Open the scanner cover and carefully remove any jammed documents from inside the scanner. Then, close the cover and resume scanning.
Why is my Kodak i24x0 Scanner running slow?
Your Kodak scanner might be running slowly because your PC doesn't meet the minimum system requirements. Also, while the scanner is designed for USB 2.0, it can function in a USB 1.1 port, but updating to USB 2.0 can improve performance.
How to fix black background bleed-through on images from Kodak i24x0 Scanner?
When scanning translucent documents with your Kodak scanner, black bleed-through may appear. To minimize this, adjust the Contrast value or select Draft (Fixed) in TWAIN or Fixed Processing in ISIS to improve the image or use the Kodak White Background Accessory.
How to remove roller marks on documents after scanning with Kodak i24x0?
To remove roller marks appearing on documents after scanning with your Kodak scanner, clean the rollers.
Why are there red, green, or blue streaks in color photos scanned with my Kodak scanner?
If you see red, green, or blue streaks running through a color photo scanned with your Kodak scanner, it indicates that the scanner is dirty and needs to be cleaned.
How to scan using Microsoft Office Document Imaging 2007 with Kodak scanner?
To scan using Microsoft Office Document Imaging 2007 with your Kodak scanner, select the scanner named: KODAK Scanner: i2000 from the Scanner drop-down list.
To Next Page
General
