Kodak i24x0 - Starting the Scan Validation Tool

2 A-61679 May 2015
Image processing refers to features of the scanner that allow you to
automatically adjust each image that may improve the resulting images
(i.e., correcting any skew in the fed document, cutting the edges of the
image off to remove unneeded borders or cleaning up extraneous
“noise” on the image).
The information in this guide provides procedures for using the TWAIN
Datasource as well as descriptions of the features. The same features
should be available on the user interface of the scanning application
you are using (i.e., Kodak Capture Pro Software).
Starting the Scan
Validation Tool
1. Select Start>Programs>Kodak>Document Imaging>Scan
Validation Tool.
2. Select TWAIN (or ISIS) for the Driver Type and the Kodak Scanner
i2000 Scanner as the Driver. The Scan Validation Tool dialog box
will be displayed.