How to resolve vertical lines appearing on images from my Kodak i3200 Scanner?
To resolve vertical lines appearing on images from your Kodak Scanner, clean the imaging guides. You can also enable the Streak Filter option or increase its aggressiveness.
What to do if my Kodak scanner will not scan documents?
If your Kodak scanner will not scan or feed documents, make sure the power cord is plugged in and the power is on. Ensure the power button has been pushed and the green LED is lit. Verify that the scanner cover is completely closed. Check that documents are making contact with the feed module and are covering the paper present sensor, and that documents meet specifications for size, weight, and type. For thicker documents, turn the gap release dial vertically to open the space between the feed module and separation module. Check the feed module and separation roller for signs of wear, and replace these parts if necessary. You can also power the scanner down and power it up again.
What to do if my Kodak i3200 Scanner shows '0' and won't communicate with PC?
If you see a '0' displayed in the operator control panel after powering on your Kodak scanner, indicating it's not communicating with the PC, check that the USB cable is in good working condition and securely plugged into both the PC and the USB port. Ensure you are using a USB 2.0 (or higher) connection, as USB 1.1 will not work. Be sure the software is loaded. Verify that the PC is recognizing the scanner: Click Start>Settings>Control Panel>Administrative Tools>Computer Management to display the Computer Management window. Select Device Manager and select your PC. The Kodak i3200 (or i3250/i3300/i3400/i3450/i3500) Scanner should be displayed under Imaging Devices. Click Action>Scan for hardware changes.
How to improve Kodak i3200 Scanner image quality?
If the image quality from your Kodak scanner is poor or has decreased, make sure that the scanner and imaging guides are clean. Refer to “5 Maintenance” on page 27.
What does U3 error mean on my Kodak i3200 and how do I fix it?
If U3 is displayed on the operator control panel of your Kodak Scanner, the document(s) you are trying to scan is too long. Verify that the Document Management: Maximum Length option on the Device-General tab (TWAIN Datasource) or the Longest Document option on the Scanner tab (ISIS Driver) is set to longer than the longest document being scanned. The default is 17 inches / 43.2 cm. You can also decrease the resolution.
How to troubleshoot Kodak Scanner displaying 0 in the operator control panel?
If your Kodak Scanner displays '0' in the operator control panel after powering on, indicating it's not communicating with the PC, try the following: * Check the USB cable to ensure it's in good condition and securely plugged into both the PC and the USB port. * Ensure you're using a USB 2.0 (or higher) connection, as USB 1.1 won't work. * Verify that the software is loaded. * Confirm that the PC recognizes the scanner by checking the Device Manager under Imaging Devices.
How to fix skewed documents during scanning with my Kodak i3200 Scanner?
To fix skewed documents during scanning with your Kodak Scanner, ensure that: the input tray side guides are adjusted to fit the documents being fed; documents are fed perpendicular to the feed module; all staples and paper clips are removed; the feed module, separation roller, and drive rollers are clean; and the scanner cover is firmly closed.
What does U9 error mean on my Kodak Scanner and how to fix it?
If U9 (document jam) is displayed on your Kodak Scanner and paper stops in the transport without jamming, verify that the Document Management: Maximum Length option on the Device-General tab (TWAIN Datasource) or the Longest Document option on the Scanner tab (ISIS Driver) is set to longer than the longest document being scanned. The default is 17 inches / 43.2 cm.
What does U3 error mean on Kodak i3200 Scanner?
If 'U3' is displayed in the operator control panel of your Kodak scanner, the document(s) you are trying to scan is too long. Verify that the Document Management: Maximum Length option on the Device-General tab (TWAIN Datasource) or the Longest Document option on the Scanner tab (ISIS Driver) is set to longer than the longest document being scanned. The default is 17 inches / 43.2 cm. You can also try decreasing the resolution.
How to remove roller marks from Kodak scanner?
If you're seeing roller marks or streaks on documents after scanning with your Kodak scanner, clean the feed module, transport rollers, separation roller, and tires. Refer to “5 Maintenance” on page 27.
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Grayscale levels | 256 |
| Maximum scan size | 305 x 4100 mm |
| Output color depth | 24 bit |
| Output grayscale depth | 8 bit |
| ADF scan speed (b/w, A4) | 50 ppm |
| Optical scanning resolution | 600 x 600 DPI |
| Duplex ADF scan speed (b/w, A4) | 100 ipm |
| Black/white scanning color modes | Grayscale |
| Display | LCD |
| Scanner type | ADF scanner |
| Product color | Black, Grey |
| Sensor type | Dual CCD |
| Scan drivers | ISIS, TWAIN, WIA |
| Scan file formats | BMP, JPG, PDF, RTF, TIFF |
| Scanning noise level | 60 dB |
| Daily duty cycle (max) | 15000 pages |
| Maximum scan area (ADF) | 305 x 863.6 mm |
| Minimum scan area (ADF) | 63.5 x 63.5 mm |
| Scanning media types supported | Plain paper |
| Maximum ISO A-series paper size | A3 |
| Auto Document Feeder (ADF) media weight | 34 - 413 g/m² |
| USB version | 3.2 Gen 1 (3.1 Gen 1) |
| Standard interfaces | USB 2.0, USB 3.2 Gen 1 (3.1 Gen 1) |
| Input voltage | 100-240 V |
| Power supply type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 0.5 W |
| Power consumption (typical) | 75 W |
| Operating temperature (T-T) | 15 - 35 °C |
| Operating relative humidity (H-H) | 15 - 80 % |
| PC connection | USB 2.0 |
| Sustainability certificates | ENERGY STAR |
| Linear (1D) barcodes supported | Code 128, Code 25 (IR 2 of 5), Code 39, EAN-13, EAN-8, U.P.C. |
| Minimum RAM | 4000 MB |
| Mac operating systems supported | Mac OS X 10.10 Yosemite, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks |
| Linux operating systems supported | Ubuntu 14.04 |
| Windows operating systems supported | Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64 |
| Auto document feeder (ADF) input capacity | 250 sheets |
| Bundled software | Capture Pro Limited Edition, Asset Management, NewSoft Presto! PageManager |
| Certification | AS/NZS CISPR 22:2009 + A1:2010 Class B (C-Tick Mark), CAN/CSA-C22.2 No. 60950-1-07 (C-UL Mark), Canada ICES-003 Issue 5 (Class B), GB4943.1:2011, GB9254:2008 (Class B), GB 17625.1:2003 Harmonics (CCC \ |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 371 mm |
|---|---|
| Width | 431.8 mm |
| Height | 238 mm |
| Weight | 15800 g |
To Next Page
