7
Cleaning inside the platesetter
Cleaning the edge detection strip
Rotate the drum to expose the edge detection strip.
Dampen a cloth with water, and slide
it along the edge detection strip.
3 4
Cleaning the plate roller
Locate the blue plate roller.
Dampen a lint-free cloth with water,
and slide the cloth over the plate roller.
3
4
Edge detection strips
Note: Do not clean the plate roller with
detergent or alcohol.
5
Close the rear hood:
a
In Print Console, lock the panels.
b
Pull down the rear hood.
1
Ensure that the platesetter
is in an idle state.
2
Open the rear hood:
a
In Print Console, unlock the panels.
b
Turn the handle counterclockwise and lift the hood.
The interior of the platesetter is
exposed for cleaning.
5
Close the rear hood:
a
In Print Console, lock the panels.
b
Pull down the rear hood.
To Next Page
Loading...
