Why is my Kodak Printer showing 'Paper Jam' and not working?
- GGregory JohnsonAug 18, 2025
The printer isn't working because paper is jammed inside. You need to clear the paper jam.
Why is my Kodak Printer showing 'Paper Jam' and not working?
The printer isn't working because paper is jammed inside. You need to clear the paper jam.
What to do if my Kodak 605 Printer says 'Paper Empty'?
The 'Paper Empty' error means that the paper is either empty or not loaded in your Kodak Printer. You should load the paper into the printer.
How to fix vertical streaks on prints from my Kodak Printer?
Vertical streaks on prints are often caused by a dirty thermal print head. You may need to clean the thermal print head.
How to fix prints with streaks made of small dots from my Kodak Printer?
Streaks made up of small dots on your prints are usually caused by a dirty platen roller. Clean the cleaning rollers.
What does it mean when my Kodak Printer displays 'Check Ribbon'?
The 'Check Ribbon' error message indicates that the ribbon is either empty, not loaded correctly, or stuck to the paper. Try loading the ribbon.
What to do if my Kodak 605 displays 'Cover Open'?
The 'Cover Open' error message means that the printer cover is not securely closed. Ensure that the cover is properly closed.
Why does my Kodak Printer say 'Check Paper'?
The 'Check Paper' error message appears when the paper is stuck in the printer or paper path.
What does it mean when my Kodak 605 Printer displays 'Incorrect Ribbon'?
The 'Incorrect Ribbon' error message means that the printer couldn't read the bar code on the ribbon. Check that the ribbon has a barcode and/or replace the ribbon.
What to do if my Kodak Printer displays 'Cutter jam'?
The 'Cutter jam' error message means that the cutter did not move completely to one side. Check the paper path for a jam.
Why is the print size wrong on my Kodak 605?
The print size or aspect ratio might be incorrect because the image file or printing options need adjustment in your photo printing software program. Here are some things you can try: * Use 'Fit to Page' or 'Clip' options, if available. * Adjust the image size to match the paper size. * Ensure the 'Portrait/Landscape' setting matches the image orientation.
Steps to install the printer driver software on your computer.
Detailed steps for loading the ink ribbon into the printer.
Instructions for loading paper rolls into the printer.
Procedure to print a test image to verify setup.
Guide on performing color calibration using the utility.
Instructions for cleaning the exterior and internal components of the printer.
Detailed procedure for cleaning the print head.
How to clean the platen roller for consistent print output.
Steps to clean the cleaning roller to prevent dirt transfer.
Table of common printer issues and their solutions.
Guide to interpreting and resolving error messages displayed on the printer.
Step-by-step instructions for removing jammed paper.
How to handle the printer after a power outage.
Critical safety precautions for operating the printer.