Calibrating the Printer
April 9, 2007 3-3
From the WINDOWS
OS Desktop
1. Click Start>Programs>KODAK Photo Printer>KODAK Photo
Printer Calibration Utility.
NOTE: If you have more than one Kodak printer that uses the Visual
Calibration Utility for calibration, the following dialog box may
appear.
2. Select the printer you wish to calibrate, and click OK.
The KODAK Visual Calibration dialog box opens. The name of the
printer and the paper installed appear in the upper left of the dialog
box.
Using the Calibration Utility
NOTE: Before you use the calibration utility, make sure you are familiar with
how the printer operates.
Calibrate your printer whenever the color balance of the prints does not look
right. You may also want to calibrate the printer after it has been serviced.
IMPORTANT: Setting the printer to factory defaults returns the printer’s
calibration to known values.
To Next Page
Loading...
