Why are sections of the image not printing on my Kodak 6900?
If sections of the image are not printing, it could be due to a dirty platen roller or a dirty pinch roller. Clean the platen roller and clean the pinch roller.
What to do if the paper surface is scratched when using my Kodak 6900?
If the paper surface is scratched, it is likely due to debris in the paper path. Clear any debris from the paper path.
Specific instructions for installing the 6950 printer, including a rear bracket and anti-tipping measures.
Steps for connecting the power cord and USB cable, including grounding outlet precautions.
Step-by-step instructions for loading paper into the printer.
Step-by-step instructions for loading the ribbon into the printer.
Detailed instructions for cleaning the thermal print head and peel roller, including safety precautions.
Procedure for cleaning the platen and pinch rollers using alcohol pads.
Steps to clean the rubber section of the cleaning roller with an alcohol pad.
Explanation of the LED displays on the operator panel and their corresponding printer statuses.
How to use the operator panel buttons to review and change printer settings.
Procedure to follow when a 'Paper Jam' message appears on the operator control panel.
Procedure for clearing a paper jam specifically in the slitter of the 6950 Printer.
General safety precautions and warnings for operating and handling the printer.
Warning about sharp cutter blades and moving parts inside and outside the printer.
Warning regarding tipping risk for the 6950 Printer and how to prevent it.
To Next Page
General
