Setting range is from 5min to
900min. Increment of each click is
5min.
Battery equalized timeout
Setting range is from 5min to 900
min. Increment of each click is 5
min.
Setting range is from 0 to 90 days.
Increment of each click is 1 day
Equalization activated
immediately
If equalization function is enabled in program 33, this program can
be set up. If “Enable” is selected in this program, it’s to activate
battery equalization immediately and LCD main page will shows
“ ”. If “Disable” is selected, it will cancel equalization function
until next activated equalization time arrives based on program 37
setting. At this time, “ ” will not be shown in LCD main page.
Reset all stored data for PV
generated power and
output load energy
Data log recorded interval
*The maximum data log
number is 1440. If it’s over
1440, it will re-write the
first log.