Kodak OGX 5.48a - Page 22

20
L3 phase:
29
Low DC cut-off voltage
default setting: 42.0V
If self-defined is selected in
program 5, this program can be
set up. Setting range is from 40.0V
to 54.0V. Increment of each click
is 0.1V. Low DC cut-off voltage will
be fixed to setting value no matter
what percentage of load is
connected.
32
Bulk charging time
(C.V stage)
Automatically (Default):
If selected, inverter will judge this
charging time automatically.
5 min
The setting range is from 5 min to
900 min. Increment of each click is
5 min.
900 min
If “USE” is selected in program 05, this program can be set up.
33
Battery equalization
Battery equalization
Battery equalization disable
(Default)
If “Flooded” or “User-Defined” is selected in program 05, this
program can be set up.
34
Battery equalization
voltage
Default setting is 58.4V.
Setting range is from 48V ~ 64V.
Increment of each click is 0.1V.