Kodak PixPro AZ422

21
Resetting Date/Time
After you set your Date/Time for the first
time, follow the instructions below to reset
date and time.
1. Turn the power switch to turn on the
camera.
2. Press the button, press the up/down
arrow buttons to select , and press
the button to enter the menu.
3. Press the up/down arrow buttons to se-
lect , and press the button or right
arrow button to enter the menu.
4. Press the up/down arrow buttons to
select「Date & Time」and press the
button or right arrow button to enter the
menu.
5. Press the left/right arrow buttons to select
the Date/Time to be adjusted: Time is
displayed in yyyy:MM:dd HH:mm.
6. Press the up/down arrow buttons to
press the value for your selected block.
After you finish your settings, press the
button to confirm.
7. Press the button and the following
snapshot screen appears.