Kodak PIXPRO Friendly Zoom FZ53

70
FW Version
Use this setting to view the current camera firmware
version.
1. Press the button, press the up/down arrow
buttons to select and press the button to
enter the menu.
2. Press the up/down arrow buttons to select and
press the button or right arrow button to enter the
menu.
3. Press the up/down arrow buttons to select「FW
Version」and press the button or right arrow
button to enter the menu.
4. When there is a new firmware version in the memory
card, select「Yes」to update.
Reset
Use this setting to restore the camera to its original
factory default settings.
1. Press the button, press the up/down arrow
buttons to select and press the button to
enter the menu.
2. Press the up/down arrow buttons to select and
press the button or right arrow button to enter the
menu.
3. Press the up/down arrow buttons to select 「Reset」
and press the button or right arrow button to
enter the menu.
4. Press the up/down arrow buttons to select「Yes」
or「No」and press the button to confirm.