85
Message Description Action
Warning! Do not turn off your
camera during update!
The message appears during the
firmware update process.
The message disappears after the camera
update and restart.
Connection Failed!
Failure to connect to your PC, printer,
TV .
Remove USB cable and retry connection
Please update firmware after
the battery is fully charged!
The firmware cannot be updated when
power is insufficient.
A message appears to prompt updating
after full charging and returning to the
update screen.
Write Protect ! The memory card is locked.
Remove memory card and switch the
lever on the side of card to UNLOCK. The
message will disappear after 2 seconds.
Card Full ! Indicates that the memory card is full.
Replace memory card with another that
has available memory. The message will
disappear after 2 seconds.
To Next Page
Loading...
