27
Panorama Mode
Panorama Mode allows you to create a panoramic
picture. The camera will automatically compose a
panoramic picture using the individual shots that you
take.
Follow these easy steps to create a panoramic picture:
1. Press button to select Panorama Mode
( ).
2. Press the arrow buttons to select a shooting
direction. (The right direction is used as default if
you do not make any choice) 2 seconds later, the
camera is ready to take pictures. You can also
press the button or half press the shutter button
to be ready to take pictures.
3. Compose the rst view of the panoramic picture
on the LCD screen and press the Shutter button to
capture the image.
4. After the rst shot is taken, the semi-transparent
image of the rst shot will appear at the edge of
the screen. You can use this image to compose
your picture before you press the Shutter button to
capture and nish manual stitching.
5. If continuous pictures are less than 4 shots, press
button, the camera will splice the pictures
automatically. Press playback button to enter
playback mode to see the effect.
6. If you take 4 pictures, the camera will splice the
pictures automatically. Press playback button to
enter playback mode to see the effect.
To Next Page
Loading...
