83
Message Description Action
Warning! Do not turn off your
camera during update!
The message appears during the
rmware update process.
The message disappears after the
camera update and restart.
Connection Failed!
Failure to connect to your PC, printer,
TV .
Remove USB cable and retry
connection
Please update rmware after
full charged!
The rmware cannot be updated when
power is insufcient.
A message appears to prompt updating
after full charging and returning to the
update screen.
Write Protect ! The SD card is locked.
Remove SD card and switch the
lever on the side of card to UNLOCK.
The message will disappear after 2
seconds.
Card Full ! Indicates that the SD card is full.
Replace SD card with another that has
available memory. The message will
disappear after 2 seconds.
To Next Page
Loading...
