72
3. Connect the other end of the cable to an available
USB port on your computer.
4. After the transmission is complete, disconnect the
USB cable according to the instructions specifying
how to safely remove USB devices.
Video System
You can use the AV cable (which should be purchased
separately) to connect the camera and the television for
realizing the video output. Connect one end of the AV
cable to AV port of the camera, connect the other end to
AV-OUT port of the television. Adjust the format of the
video output system according to your requirements, and
the steps are as follows:
1. Press the button, press the up/down arrow
buttons to select and press the button to
enter the menu.
2. Press the up/down arrow buttons to select and
press the button or right arrow button to enter the
menu.
3. Press the up/down arrow buttons to select「TV-
System」and press the button or right arrow
button to enter the menu.
4. Press the up/down arrow buttons to select 「NTSC」
or「PAL」and press the button to confirm.
To Next Page
Loading...
