Kodak Pocket Pico Projector - Computer Display Setup

10
If your computer does not automatically recognize the projector, it means that you must irst enable
the use of external displays. Each computer is dierent and may require a dierent setup.
To set up Windows 7 for external displays, follow the instructions below.
a. Open the start menu and select the “Control Panel”.
b. Select “Appearance and Personalization”.
c. Under the “Display” section, select “Connect to an external display”.
d. Here you will be able to select your projector as an external display.
a
b
5D. ENABLE YOUR COMPUTER FOR EXTERNAL DISPLAYS
1 Devices with HDMI port
2 Devices with mini HDMI port
3 Devices with micro HDMI port
4 iOS devices with lightning port
5
Devices with USBC
(USB type C) port
6
Devices with USBC
(USB type C) port
7
Devices with Screen
Mirroring Function
HDMI to Mini HDMI cable
Mini HDMI adapter to HDMI cable HDMI to Mini HDMI cable
Micro HDMI adapter to HDMI cable HDMI to Mini HDMI cable
Lightning digital AV adapter
HDMI to Mini HDMI cable
USBC to HDMI adapter
HDMI to Mini HDMI cable
USB type C to Mini HDMI cable
Mini HDMI adapter to Wireless dongle