Kodak RETINA IIIC

1
UITI
r 0
eps
After setting the film index in the ASA window,
as described on page 20,
1. Point the exposure meter at the subject.
2. Tu rn the meter setting ring to make the yellow
pointer coincide with the white needle of the meter .
3.
Read the exposure value.
4.
Set the exposure va lue on the shutter speed
ring by means of the exposure - value lever.
5.
If necessary, al ter the lens opening- s hutter
speed combination by simply turning the speed
setting ring.
Make sure the exposure-value lever ;s n ot acciden-
tally shift ed from the set exposure value . 11
2
3
4
5