Kodak RETINA IIIC

without
exposure values
Shutter speeds and lens openings can also be set
without reference to exposure values. However,
the shutter speed must be set first and the lens
opening after. Otherwise, the lens opening will be
changed because of the speed ring coupling.
If a subject needs a longer exposure time than one
second, make a
time exposure. Simply mount the
camera on a tripod or other firm support and make
an exposure+:' for the desired time, with the shutter
set at B.
Set the lens opening; then press the exposure
release for the correct interval; the shutter is open
while
the exposure release is depressed.
"' The Kodak Metal Cable Release No.5 screws into the top of the exposure
release. The camera should be mounted on a tripod or other firm support
for all exposure times longer than 1/30 second.
33