Kodak RETINA IIIC

Electronic Flash - Set the synchronizer selector
pointer on X. With electronic flash equipment
having no lag in the trip circuit, set the shutter at
any speed from 1 second to 1;500 second.
Note: Do not use units flashed by means of heavy-
duty relays or solenoids. Such units may destroy
the shutter contacts.
THE SELF-TIMER-If you wish to include yourself in
a picture , first operate the rapid wind lever; then
set the selector pointer to V. Start the self-timer
mechanism by pressing the exposure release"x". The
shutter will go off after about 10 seconds - time to
take your place in the picture.
If you use the self-timer for flash shots, the
camera works with the X-synchronization. As the
self-timer runs down, the synchronizing lever
automatically moves to X. Be sure to use the cor-
rect shutter speed setting for X-synchronization.
No.5, No. 25 or No. 8 lamps can be used at X
selector
setting for speeds from 1 to 1/30 second. 27
*After moving the selector lever to "V," it must be returned by making
an exposure. Do not force the lever.