Kodak RETINA REFLEX III

SHUTTER OPERATING CONTROLS
The SETTING WHEEL is used to set the film ~peed, to
set the correct exposure as described on the next
page, and to preselect a
shutter speed. Do not set
between
marked shutter speeds.
The SPEED RING is used to select Shutter Speed -
Lens Opening combinations
from those available,
for picture-taking situations.
Turn the speed ring
gently, by its black
hand les, and do not set between
marked speeds or rotate past shutter speed at which
the triangular
INDEX indicates 1/22 or maximum
aperture of lens in use (J /4, fl2.8 or fl1.9). Do
not lorce.
The black figures on
the shutter speed ring
indicate fractions
of a
second - 1
= 1 second.
2= 1Iz second, etc. Use
of the letter "B" (Brief
Time Exposure) and the
green figures will be
found on page 22.
11
I
IN DE X