A-61796 January 2017 91
- If you entered a Private Key file in the Private Key Password
field and the file is password protected, you must enter a
password. The password is used to decrypt the Private Key
file.
Click the Proxy down arrow to configure the proxy settings. SFTP
supports two proxy types: HTTP and SOCKS.
HTTP
- If you select HTTP as your Proxy Type, enter the Proxy
Address in the form of a fully qualified domain name (e.g.,
FTP.acme.com) or as an IP address.
- Enter the Username and Password required to access the
proxy server.
- If the proxy server is configured to communicate on a port
other than Port 81, change the value using the up and down
arrows.
- Select the appropriate Authentication Type for the proxy
server. If you do not know if you should use LOGIN or NTLM,
consult your administrator.
SOCKS
- If you select SOCKS as your Proxy Type, enter the Proxy
Address in the form of a fully qualified domain name (e.g.,
FTP.acme.com) or as an IP address.
- Enter the Username and Password required to access the
proxy server.
- If the proxy server is configured to communicate on a port
other than Port 1080, change the value using the up and
down arrows.
- Select the appropriate Version for the proxy server. If you do
not know if you should use SOCKS4 or SOCKS5, consult
your administrator.
7. Click Finish.
8. If you want to add more FTP destinations within the same FTP
destination group, select the Add icon and repeat Steps 5 - 8.
9. To add another FTP destination group, select the FTP destination
type and then click the Add icon, otherwise, click Finish.
To Next Page
Loading...
