88 A-61796 January 2017
8. In the Printer Driver Settings section, enter the location of the printer
driver setup information file in the Printer Driver Location field or use
the Browse button. The printer driver can be located on any PC
connected to the same network and its location must be accessible
from the Scan Station(s).
NOTE: If you are creating a configuration to be used on the older
Scan Station models (500/520EX) enter the address of the
print server containing the printer driver into the Address
(500 series only) field.
9. Print a test page on the target printer from another computer.
10.Enter the driver name in the Driver Name field. This string can be
found on the test page.
11. Enter the port name into the Port Name field. This string can be
found on the test page.
12.Click Finish.
13.If you want to add more printer destinations within the same printer
destination group, click the Add icon.
14.To add another printer destination group, select the printer
destination type and then click the Add icon, otherwise click Finish.
The printer driver will be installed from the sharing PC. After the initial
installation, the Scan Station will be able to communicate directly with
the network printer.
NOTE: If a printer fails to install, check the logfile for the error code and
search for the error code on the Microsoft website.
To Next Page
Loading...
