Kodak ScanMate i1180 - Page 30

A-61818 April 2014 29
NOTES:
• This option is only available for duplex scanner models.
• This option is only available when Input document is is set to Two
Sided, Different settings per side is turned off and Images per side is
set to One; and the document is scanned from the Document Feeder.
• This option is not applied to the preview image.
Images per side — indicates how many images the scanner will create
for a side, based on your imaging selections.
• One: indicates you want the scanner to create one image.
• One - Based on Document Content: indicates you want the
scanner to automatically detect if the document is color/grayscale or
black and white. This option is not applied to the preview image.
• Multiple: indicates you want the scanner to create more than one
image.
NOTE: If you select One - Based on Document Content from the
Images per side option, the Content Settings tab will be
displayed.
Images to Configure — indicates which electronic images you need to
configure.
NOTE: This is only available if you select anything other than One from
the Images per side option. For procedures on how to configure
advanced options, see the sections that follow:
• Creating color/grayscale or black and white images based
on the content of your documents, Example 1.
• Creating multiple images for each side of a document,
Example 2.
• Creating different settings for each side of a document,
Example 3.
When available, use the up and down arrows to select the order the
images will be delivered by the scanner to the scanning application.
Toolbar buttons
Done — returns you to the Image Settings window.
Add: adds an image type to the bottom of the configuration list.
Change: allows you to change the currently selected image
type.
Delete: removes the selected image type.