A-61766 October 2012 12
• To turn the scanner off: close the top cover. It is recommended that
when the scanner is not in use you keep the cover closed. By default,
if the scanner is on and left idle for more than 60 minutes after the
scanner goes into energy star mode, the scanner will power off. To
power the scanner back on, close the cover and then open the cover.
Power saver mode: by default, after 15 minutes of inactivity, the scanner
will automatically enter into power saver mode.
To activate the scanner from power saver mode press the Up arrow or
close the cover then open the cover.
To Next Page
Loading...
