11
Q What can you do with the camera’s built-in Bluetooth?
A The camera connects to mobile devices via Bluetooth in order to connect to the app. Once connected, you
can use the app to edit and customize photos already on your phone and print out photos from your phone.
Q Do I need to download the app to use the Kodak Smile+?
A It’s more fun if you do! The Kodak Smile app allows you to apply stickers, ilters and more to photos already
on your phone and send them to print from your device.
Q How does the memory card slot work?
A The memory card slot is used to insert a microSD card. Once a microSD card is inserted into the
camera, you can save the photos you take. However, you cannot print photos saved on the memory card.
Q Is a microSD™ card required for this camera?
A A microSD™ card is not required in order to use the camera. If you want to save your photos to your
computer, you will need to have a microSD™ card or comparable memory card in your camera while
you take your pictures.
Q What type of paper is compatible with this camera?
A The Kodak Smile+ is designed to work only with Kodak Zink 2x3 photo paper. Other papers are
incompatible with this camera.
Q How do I turn on the lash for my camera?
A Your camera is equipped with a light sensor that will automatically turn on the lash in low light settings.
Q How do I charge my camera?
A To charge the battery in your camera, you will need to plug in the included USBC cable into a wall adapter
(not included). Using a computer or laptop to charge the camera is not recommended because it will
signiicantly increase charging time.
Q Why are my photos blank when they print?
A The Kodak Zink photo paper may have been loaded upside down. When loading the paper, ensure
that the blue calibration sheet is at the bottom with the barcode facing down, and the rest of the paper is
facing with the glossy side up.
OR
The paper may have been pushed too deeply inside the device. Remove the paper and reload it
gently inside the compartment.
Q How do I attach the Kodak Color Straps to my camera?
A The optional color straps, sold separately, can be attached to your camera quickly and easily. First,
thread the cord loop through one of the camera rings. Then, thread the quick-release buckle through
the loop and pull the buckle to cinch it. Repeat with the second camera ring.
Q Why do I need to load the cleaning sheets?
A The blue calibration sheets are created by Zink to clean the paper path rollers of the device and
provide the best print quality. The sheet has two main functions:
a. Calibrates the printer in order to provide the best print quality for your speciic Kodak Photo Paper.
b. Cleans the paper path rollers to get rid of any dust or debris during calibration, or when you need to
improve printing quality.
Be sure to load each pack of paper with its included cleaning sheet to ensure the best print quality.
Make sure you are loading your paper in a neatly aligned stack with the blue calibration sheet on bottom
facing down and the rest of the paper with the glossy side up.
To Next Page
Loading...
Need help?
General
