What does it mean when a tracked target exceeded the CPA/TCPA limit on my Koden Marine Radar?
If your Koden Marine Radar displays 'Tracked target exceeded the CPA/TCPA limit,' it means a tracked target has turned into a dangerous target.
What does it mean when an AIS target exceeded the CPA/TCPA limit on my Koden MDC-7900P?
If your Koden Marine Radar displays 'AIS target exceeded the CPA/TCPA limit,' it means an AIS target has turned into a dangerous target.
Why is my Koden MDC-7900P auto acquiring a radar target?
If your Koden Marine Radar is auto acquiring a radar target, it is because a target entered into the auto acquisition area.
General| Output Power | 25 kW |
|---|---|
| Range | Up to 96 nautical miles |
| Display | Color LCD |
| Resolution | 1280 x 1024 pixels |
| Power Supply | 24 V DC |
| Operating Temperature | -15°C to +55°C |
| Frequency | 9410 MHz ±30 MHz |
| Rotation Speed | 24 rpm |
| Display Size | 19 inches |
| Antenna Length | 4 feet |
| Beam Width | Horizontal: 1.2°, Vertical: 20° |
Covers operating safety, health risks from radio waves, and high voltage warnings.
Safety measures for maintenance, including residual voltage, power, dust, static, and break-in procedures.
Covers scanner unit views, dimensions, mounting, and cable connection for RB808P/RB809P.
Covers views, dimensions, and mounting for MRD, MRO, and MRM units.
Covers system interconnection and connecting various devices like external monitors, VDR, gyro, AIS, EPFS, SDME, JB-35, inter-switch.
Configuration of tune, heading, TX delay, antenna height, cable, MBS, SEA curve, function keys, range, times, monitor size, ferry menu.
Configuration of heading, speed, position, SET/DRIFT, TIME, and output signals.
Guides through troubleshooting specific issues like power, display, response, echo, data, AIS, and antenna failures.
To Next Page
