Koehler K19404 - Getting Started; Packing List; Additional Accessories Required for Testing; Unpacking

K19404, K19494 Dropping Point Apparatus
Operation and Instruction Manual
K19404, K19494-Manual -8-
3 Getting Started
The instructions for preparing the equipment
assume that the user is aware of the contents of
this document, which lists the warranty conditions
and important precautions.
3.1 Packing List
 K194X4 Dropping Point Apparatus
 K194X4-Manual K194X4 Dropping Point
Apparatus Operation and Instruction Manual
Included Accessories (See Figure 1 below)
- K19494-0-12 Motor Assembly (1)
- 332-002-005 Borosilicate Glass Beaker,
400mL (2)
- K194EA Grease Cup (3)
- K19492 Test Tube with indentations (4)
- K19499 Cork Ring Guide (5)
- K19493 / K194A-0-7 Thermometer Cork,
Qty 2 (6)
- K194E5 Thermometer Depth Gage (7)
- 338-000-001 Clamp Holder (8)
- K194A-0-6 Tube / Thermometer Support (9)
- K194E6 Polished Metal Rod (10)
- 432-111-001 Gage Pin, 2.82mm (0.111")
Outer Diameter (11)
Figure 1: Packing List Components
3.2 Additional Accessories Required for
Testing
 250-000-02C ASTM 2C Thermometer
Range: -5 to +300°C
 250-000-02FASTM 2F Thermometer
Range: 20 to 580°F
 K194E7 Cup Plug Gage
Checks conformity of test cup with
specifications
3.3 Unpacking
1. Check Shock Watch Label on Cardboard Box
for indication of rough handling and possible
damage.
2. Check labeling for correct orientation of
instrument. (e.g. This Side Up)
3. Carefully open top of box with box cutter and
remove packing foam insert.
4. Extract instrument and place on suitable cart
for transportation to work area / lab bench.
WARNING: Be sure two or more individuals
are available for extracting and lifting instrument
from box to cart and from cart to bench.
Individuals must lift in accordance to proper
technique. See Figure below.
5. Lift instrument from cart and place on bench.
6. Carefully unpack and place the instrument and
accessories in a secure location. Ensure that
all parts listed on the packing list are present.
Inspect the unit and all accessories for
damage. If any damage is found, keep all
packing materials and immediately report the
damage to the carrier. We will assist you with
your claim, if requested. When submitting a
claim for shipping damage, request that the
carrier inspect the shipping container and
equipment. Do not return goods to Koehler
without written authorization.