Need help?Do you have a question about the Kofloc FM01 Series and is the answer not in the manual?
General| Brand | Kofloc |
|---|---|
| Model | FM01 Series |
| Category | Measuring Instruments |
| Language | English |
Proper storage conditions including temperature, humidity, and protection from elements.
Key factors for installing the flow meter to ensure safe and accurate operation.
Precautions against water pressure, freezing, overtightening, and cable strain during handling.
Warning against performing insulation resistance/dielectric strength tests to prevent circuit damage.
Details the warranty duration and conditions for product malfunctions.
Describes the flow meter's function, Karman vortex principle, and material properties.
Lists key technical parameters including fluid compatibility, material, accuracy, and operating conditions.
Correlates models with their diameter, flow range, and specific connection fittings.
Illustrates wiring for current, pulse, and indicator outputs with voltage and load details.
Provides physical dimensions (a, L, X) and fitting types for each FM01 model.
Visualizes the linear relationship between flow rate (L/min) and output current (mA) for each model.
Step-by-step process for setting alarm polarity and threshold values for AL1 and AL2.
Guides on setting flow units (GAL/L) and configuring product types for the meter.
Instructions for setting the zero and span (4-20mA) for the analog output signal.
Process for calibrating the flow span based on actual flow device readings.
Detailed steps for setting the flow unit to L/min or gal/min.
Steps to set the zero point for the analog output signal.
Steps to set the span for the analog output signal.
Procedure for setting the flow span based on actual flow device values.
To Next Page