What to do if there is air in the fuel system of my Kohler 16EKOZD?
If there is air in the fuel system of your Kohler Portable Generator, bleed the diesel fuel system. The cause is air in the fuel system.
What to do if the starter or starter solenoid is inoperative on my Kohler 16EKOZD?
If the starter or starter solenoid is inoperative on your Kohler Portable Generator, replace the starter or starter solenoid. The cause is an inoperative starter/starter solenoid.
What to do if the fuel or fuel injectors are dirty or faulty in my Kohler 16EKOZD?
If the fuel or fuel injectors are dirty or faulty in your Kohler Portable Generator, clean, test, and/or replace the inoperative fuel injector. The cause is dirty or faulty fuel or fuel injectors.
What to do if the high exhaust temperature switch is inoperative on my Kohler 16EKOZD?
If the high exhaust temperature switch is inoperative on your Kohler Portable Generator, replace the inoperative switch. The reason is that the high exhaust temperature switch is inoperative.
What to do if the high water temperature switch is inoperative on my Kohler 16EKOZD Portable Generator?
If the high water temperature switch is inoperative on your Kohler Portable Generator, replace the inoperative switch. The cause is that the high water temperature switch is inoperative.
What to do if the governor is inoperative on my Kohler 16EKOZD Portable Generator?
If the governor of your Kohler Portable Generator is inoperative, adjust the governor. This is because the governor is inoperative.
What to do if the low oil pressure switch is inoperative on my Kohler Portable Generator?
If the low oil pressure switch is inoperative on your Kohler Portable Generator, replace the low oil pressure switch and check the engine for damage. This is because the low oil pressure switch is inoperative.
General| Model | 16EKOZD |
|---|---|
| Type | Portable Generator |
| Fuel Type | Gasoline |
| Voltage | 120/240V |
| Frequency | 60 Hz |
| Warranty | 3 Years Limited |
Specifies the type of generator sets covered in this manual.
Lists essential checks before starting the generator set.
Describes the features of the Decision-Maker® 3500 controller.
Explains how the controller functions and responds to inputs.
Explains how to monitor and program the controller via PC.
Covers general safety practices and basic maintenance.
Provides a maintenance schedule for specific generator models.
Provides a maintenance schedule for specific generator models.
Details the procedure for inspecting and replacing the seawater pump impeller.
To Next Page
