TP-6953 7/19 61Section 2 Operation
SiteTecht Parameter
Write
Access
Units
Decision-Maker
r
3500
User Interface
Notes
Generator Voltage L2-L3 None V L2- L3 Volts: ###V
Generator Voltage L3-L1 None V L3- L1 Volts: ###V
Generator Voltage Average Line To Line None V AVG Gen Voltage L- L: ###V
Generator Voltage L1-N None V L1- L0 Volts: ###V
Generator Voltage L2-N None V L2- L0 Volts: ###V
Generator Voltage L3-N None V L3- L0 Volts: ###V
Generator Voltage Average Line To Neutral None V AVG Gen Voltage L- N: ###V
Generator Current L1 None A L1 Current: ###A
Generator Current L2 None A L2 Current: ###A
Generator Current L3 None A L3 Current: ###A
Generator Current Average None A AVG Current: ###A
Generator Phase Angle AB To L2-L3 None
_
Generator Phase Angle AB To L3-L1 None
_
Generator Phase Angle Voltage A To Current L1 None
_
Generator Phase Angle Voltage B To Current L2 None
_
Generator Phase Angle Voltage C To Current L3 None
_
AC Frequency None Hz Gen Frequency: ##.#Hz
Generator Percent Of Rated Real Power None % Gen % of Rated k W: ###%
Generator Real Power L1 None W L1 Power: ####W
Generator Real Power L2 None W L2 Power: ####W
Generator Real Power L3 None W L3 Power: ####W
Generator Total Real Power None W Total Power: ####W
Bus Metering
Bus Voltage L1-L2 None V
Bus Voltage L2-L3 None V
Bus Voltage L3-L1 None V
Bus Voltage Average Line To Line None V AVG Bus Voltage L- L: ###.#V
Bus Total Real Power None kW
Bus Total Real Power Percentage None %
Bus Total Reactive Power Percentage None %
Bus Frequency None Hz Bus Frequency: ##.##Hz
Bus Rotation Actual None Bus Phase Rotation:
Disabled/A-B-C/C-B-A
Phase Angle Generator Voltage AB Bus Voltage L1-L2 None
_ Phase Difference: ###.#
_
Speed Bias 2
Not supported for these models.
Voltage Bias 2
Bus Phase Angle A B To L2 -L3 None
_
Bus Phase Angle A B To L3 -L1 None
_
Genset Info
Genset Model Number Locked Genset Model #: XXXXXXXXX
Genset Spec Number Locked Genset Spec #: XXXXXXXXX
Genset Serial Number Locked Genset Serial #: XXXXXXXXX
Alternator Part Number Locked Alternator Part #: XXXXXXXXX
Genset Controller Serial Number None Controller Serial #: XXXXXXX
Engine Part Number Not supported for these models.
Engine Model Number Locked Engine Model #: XXXXXXXXX
Engine Serial Number
Not supported for these models.
ECM Serial Number
Genset State None Thepresentstateofthe
genset
Master Switch Position None
Genset Run Time
Genset Controller Clock Time Always Time: ##:## XM
Date: ##/##/####
The present time on the
controller system clock
Genset Controller Total Operation Time None h Operating Hours: ######hrs The total number of hours
that power has been
applied to the genset
controller
Engine Total Run Time None h Total Run Time: #####hrs The total number of hours
that the engine has been
running
To Next Page
Loading...
