To Next PageTo Next PageWhat causes high fuel consumption in Kohler Marine Equipment?
If your Kohler Marine Equipment has high fuel consumption, use the correct fuel. Service the air intake screen if it's clogged or dirty. Reduce the load if the engine is overloaded. Check the thermostat if the engine temperature is low. Check for leaks at the fuel tank, lines, and engine fuel system if there is fuel leakage.
What to do if Kohler 3.5EFOZ starter does not work properly?
If your Kohler Marine Equipment starter does not work properly, clean and tighten the loose connections. Check the electrolyte level and specific gravity (batteries with filler caps only) and check battery voltage if there is low battery output power. Replace the starter solenoid if it's inoperative. Replace the switch if the start/stop switch is inoperative. Check the wiring if it's inoperative.
What causes a Kohler Marine Equipment engine to knock?
If your Kohler Marine Equipment engine knocks, use the proper fuel type, consulting the fuel supplier if needed and bleed air from injectors.
Why does my Kohler 3.5EFOZ starter crank slowly?
If your Kohler Marine Equipment starter cranks slowly, check the electrolyte level and specific gravity (for batteries with filler caps only) if there's low battery output. Use proper viscosity oil if the lube oil is too heavy. Clean and tighten loose connections if there's loosened or corroded wiring.
What causes low lube oil pressure in Kohler Marine Equipment?
If your Kohler Marine Equipment has low lube oil pressure, add lube oil if the lube oil level is low. Drain and fill with the correct lube oil if the lube oil viscosity is incorrect. Replace the shutdown switch if the oil pressure switch is inoperative.
General| Brand | Kohler |
|---|---|
| Model | 3.5EFOZ |
| Category | Marine Equipment |
| Language | English |
