Need help?Do you have a question about the Kohler 5E/4EF and is the answer not in the manual?
General| Brand | Kohler |
|---|---|
| Model | 5E/4EF |
| Category | Marine Equipment |
| Language | English |
Precautions to prevent accidental starting and associated severe injury or death.
Safety guidelines for handling batteries, including acid hazards and cleanup.
Warnings regarding fire hazards and handling engine fluids and chemical products.
Safety information regarding carbon monoxide and handling explosive fuel vapors.
Critical safety measures for dealing with hazardous noise and electrical shock.
Safety advice concerning hot components, moving rotors, and rotating parts.
Guidelines for tightening hardware, servicing moving parts, and sound shield removal.
Illustrates typical placement and mounting of generator sets for specific models.
Key factors for selecting a generator set location and installation considerations.
Procedures and recommendations for securely mounting the generator set to the craft.
Requirements for engine compartment ventilation and air intake restrictions.
Key features and components of the marine generator set cooling system.
Guidelines for waterlines, closed heat exchangers, and their installation.
Requirements for water-cooled exhaust lines, silencers, and system connections.
Installation of silencers and exhaust lines above the waterline, including pitch and distance.
Installing siphon breaks and silencers for mid/below waterline exhaust systems.
Arrangements for fuel pickups and connecting flexible fuel lines.
Installation of fuel filters and antisiphon devices in fuel lines.
Steps to bleed air from the fuel system for specific models.
Making AC connections and understanding circuit breaker function and selection.
Mounting, sizing, and installation of circuit breakers for generator sets.
Requirements for battery installation, grounding, cable sizing, and wiring.
Information on connecting remote panels and wiring harnesses to the controller.
Table listing model numbers, drawing references, and page numbers for installation drawings.
Detailed dimensions for various generator set models and their configurations.
Safety precautions for accidental starting and grounding electrical equipment.
Illustrates reconnection of four-lead generator sets according to NEC standards.
Procedure for adjusting voltage regulators on specific generator set models.
Procedures for adjusting the ADC 2100 controller settings.
Detailed steps for adjusting coarse/fine voltage and stability using the controller.
Considerations for selecting generator set size based on total wattage needs and load types.
Calculating capacity for motor loads and typical air conditioner requirements.
How generator output is corrected for environmental variables using formulas.
To Next Page
