How to address fuel filter restriction in my Kohler 32EKOZD Portable Generator?
If the fuel filter of your Kohler Portable Generator is restricted, clean or replace the fuel filter. The cause is fuel filter restriction.
What to do if my Kohler Portable Generator runs out of fuel or the fuel valve is off?
If your Kohler Portable Generator's fuel tank is empty or the fuel valve is shut off, add fuel and move the fuel valve to the ON position. This is because the fuel tank is either empty, or the fuel valve is shut off.
How to fix loose or corroded battery connections on a Kohler Portable Generator?
If the battery connections of your Kohler Portable Generator are loose, corroded, or incorrect, verify that the battery connections are correct, clean, and tight. The cause of this problem is that the battery connections are loose, corroded, or incorrect.
What to do if my Kohler Portable Generator is experiencing an engine overload?
If your Kohler Portable Generator experiences an engine overload, reduce the electrical load. The cause is engine overload.
What to do if my Kohler Portable Generator shuts down due to low oil pressure?
If your Kohler Portable Generator experiences a low oil pressure shutdown, check the oil level. This is due to low oil pressure shutdown.
How to fix an exhaust system leak on my Kohler 32EKOZD?
If you discover an exhaust system leak in your Kohler Portable Generator, inspect the exhaust system and replace any inoperative exhaust system components. This is because there is an exhaust system leak.
How to secure a loosely installed exhaust system on my Kohler 32EKOZD Portable Generator?
If the exhaust system of your Kohler Portable Generator is not securely installed, inspect the exhaust system and tighten any loose components. This is because the exhaust system is not securely installed.
What to do if the transfer switch test switch is in the OFF position on my Kohler 32EKOZD?
If the transfer switch test switch is in the OFF position on your Kohler Portable Generator, move the transfer switch test switch to the AUTO position. This is because the transfer switch test switch is in the OFF position.
What to do if the oil level is low in my Kohler Portable Generator?
If the oil level is low in your Kohler Portable Generator, restore the oil level and inspect the generator set for any oil leaks. The reason for this is that the oil level is low.
How to replace a fuse on a Kohler Portable Generator?
To replace a fuse on your Kohler Portable Generator, use fuses of the same ampere rating and type (for example: 3AB or 314, ceramic). Do not substitute clear glass-type fuses for ceramic fuses.
General| Model | 32EKOZD |
|---|---|
| Type | Portable Generator |
| Voltage | 120/240V |
| Frequency | 60 Hz |
| Warranty | 3 years limited |
| Maximum AC Output | 32000 watts |
Steps to perform before starting the generator set, covering air inlets, battery, coolant, and exhaust.
Covers controller modes (OFF, RUN, AUTO), start/stop signals, and engine cooldown.
Details accessing controller data via display or PC using SiteTech™ software.
Provides a detailed service schedule for specific generator models, including intervals and tasks.
Provides a detailed service schedule for specific generator models, including intervals and tasks.
Details oil specifications, oil checks, and oil change procedures.
Covers fuel specifications, fuel filter replacement, and fuel system bleeding.
Chart to diagnose and resolve issues related to controller display and voltage regulation.
Critical safety warning about accidental starting and procedures to prevent it.
Dangers associated with electrical voltage and moving parts requiring safety measures.
To Next Page
