What to do if there is air in the fuel system of my Kohler 32EKOZD Portable Generator?
If there is air in the fuel system of your Kohler Portable Generator, bleed the diesel fuel system. The cause is air in the fuel system.
What to do if the starter or starter solenoid is inoperative on my Kohler 32EKOZD?
If the starter or starter solenoid is inoperative on your Kohler Portable Generator, replace the starter or starter solenoid. The cause is an inoperative starter/starter solenoid.
What to do if the fuel or fuel injectors are dirty or faulty in my Kohler Portable Generator?
If the fuel or fuel injectors are dirty or faulty in your Kohler Portable Generator, clean, test, and/or replace the inoperative fuel injector. The cause is dirty or faulty fuel or fuel injectors.
What to do if the high exhaust temperature switch is inoperative on my Kohler Portable Generator?
If the high exhaust temperature switch is inoperative on your Kohler Portable Generator, replace the inoperative switch. The reason is that the high exhaust temperature switch is inoperative.
What to do if the high water temperature switch is inoperative on my Kohler 32EKOZD?
If the high water temperature switch is inoperative on your Kohler Portable Generator, replace the inoperative switch. The cause is that the high water temperature switch is inoperative.
What to do if the governor is inoperative on my Kohler 32EKOZD?
If the governor of your Kohler Portable Generator is inoperative, adjust the governor. This is because the governor is inoperative.
What to do if the low oil pressure switch is inoperative on my Kohler 32EKOZD?
If the low oil pressure switch is inoperative on your Kohler Portable Generator, replace the low oil pressure switch and check the engine for damage. This is because the low oil pressure switch is inoperative.
General| Model | 32EKOZD |
|---|---|
| Type | Portable Generator |
| Voltage | 120/240V |
| Frequency | 60 Hz |
| Warranty | 3 years limited |
| Maximum AC Output | 32000 watts |
Steps to perform before starting the generator set, covering air inlets, battery, coolant, and exhaust.
Covers controller modes (OFF, RUN, AUTO), start/stop signals, and engine cooldown.
Details accessing controller data via display or PC using SiteTech™ software.
Provides a detailed service schedule for specific generator models, including intervals and tasks.
Provides a detailed service schedule for specific generator models, including intervals and tasks.
Details oil specifications, oil checks, and oil change procedures.
Covers fuel specifications, fuel filter replacement, and fuel system bleeding.
Chart to diagnose and resolve issues related to controller display and voltage regulation.
Critical safety warning about accidental starting and procedures to prevent it.
Dangers associated with electrical voltage and moving parts requiring safety measures.
To Next Page
