What to do if there is air in the fuel system of my Kohler 40EKOZD Portable Generator?
If there is air in the fuel system of your Kohler Portable Generator, bleed the diesel fuel system. The cause is air in the fuel system.
What to do if the starter or starter solenoid is inoperative on my Kohler Portable Generator?
If the starter or starter solenoid is inoperative on your Kohler Portable Generator, replace the starter or starter solenoid. The cause is an inoperative starter/starter solenoid.
What to do if the fuel or fuel injectors are dirty or faulty in my Kohler 40EKOZD?
If the fuel or fuel injectors are dirty or faulty in your Kohler Portable Generator, clean, test, and/or replace the inoperative fuel injector. The cause is dirty or faulty fuel or fuel injectors.
What to do if the high exhaust temperature switch is inoperative on my Kohler Portable Generator?
If the high exhaust temperature switch is inoperative on your Kohler Portable Generator, replace the inoperative switch. The reason is that the high exhaust temperature switch is inoperative.
What to do if the high water temperature switch is inoperative on my Kohler 40EKOZD Portable Generator?
If the high water temperature switch is inoperative on your Kohler Portable Generator, replace the inoperative switch. The cause is that the high water temperature switch is inoperative.
What to do if the governor is inoperative on my Kohler 40EKOZD Portable Generator?
If the governor of your Kohler Portable Generator is inoperative, adjust the governor. This is because the governor is inoperative.
What to do if the low oil pressure switch is inoperative on my Kohler Portable Generator?
If the low oil pressure switch is inoperative on your Kohler Portable Generator, replace the low oil pressure switch and check the engine for damage. This is because the low oil pressure switch is inoperative.
General| Model | 40EKOZD |
|---|---|
| Type | Portable Generator |
| Power Output | 40 kW |
| Fuel Type | Diesel |
| Starting Method | Electric Start |
| Frequency | 60 Hz |
| Maximum AC Output | 40 kW |
| Engine Type | KOHLER Diesel Engine |
| Voltage | 120V |
Safety warnings for accidental starting, hazardous voltage, moving parts, and electrical hazards.
Warnings about fuel vapors, carbon monoxide, and hot parts.
Warnings for hot components, noise exposure, and saltwater damage.
Procedures for pre-operation checks, marine inspections, and angular operation limits.
Details on controller models, specifications, and data requirements.
Overview of controller buttons, displays, metering, and information menus.
Settings for controller configuration, communication protocols, and I/O mapping.
Understanding operation modes, status lamps, warnings, and shutdown faults.
Methods for monitoring and programming the controller via PC or display.
Overall maintenance overview and specific schedules for model ranges.
Procedures for lubrication, fuel, air cleaner, exhaust, and cooling systems.
Maintenance for belts, battery care, and generator set storage.
Specific chart for diagnosing controller display and voltage issues.
Table of common problems, causes, and recommended actions.
Index to locate specific wiring diagrams for generator set models.
Glossary of abbreviations used in the manual.
Log for tracking generator usage and maintenance history.
To Next Page
