TP-5393 9/932-2 Operation
Circuit Protection
ACCircuitBreaker(s)—willtripwhenafaultisdetected
in the AC output circuit. See Section
4—Troubleshooting to determine cause of fault. After
fault is corrected, reset AC circuit breaker by placing in
“ON” position.
Input (Controller) Fuse (15 Amp)—indicates a fault in
the controller circuit. See Section 4—Troubleshooting.
After fault is corrected, fuse must be replaced. Unit is
now ready to be restarted.
Voltage Regulator Fuse (5 Amp)—Indicates a fault in
thevoltageregulator and/orgenerator circuit. After fault
is corrected, replace fuse. Voltage regulator circuit is
now functional.
De-Icing Module Fuse (5 Amp) (on gasoline-fueled
units)—Indicates a fault in the de-icing circuit. After
fault is corrected, replace fuse.
Battery Charging Circuit Breaker (25 Amp)(on units
equipped with battery charging)—indicates a fault in
the battery charging circuit. Breaker will automatically
reset.
To Next Page
Loading...
