What to do if Kohler 99EOZ oil level low?
- EEric BennettAug 27, 2025
If the oil level is low, restore it and inspect the generator set for oil leaks.

What to do if Kohler 99EOZ oil level low?
If the oil level is low, restore it and inspect the generator set for oil leaks.
What to do if Kohler 99EOZ controller fuse blown?
If the controller fuse is blown, replace it. If the fuse blows again, troubleshoot the controller.
What to do if Kohler 99EOZ fuel tank is empty?
If the fuel tank is empty or the fuel valve is shut off, add fuel and move the fuel valve to the ON position.
| Phase | 1 |
|---|---|
| Fuel Type | Gasoline |
| Starting Type | Electric |
| Compression Ratio | 8.5:1 |
| Cooling System | Air-Cooled |
| Fuel System | Carburetor |
| Ignition System | Electronic |
| AC Voltage | 120/240V |
| Hertz | 60 Hz |
| Engine Type | 4-cycle OHV |
Precautions for accidental start-up and battery handling, including acid and gas hazards.
Risks from fuel, vapors, fire hazards, and exhaust systems, including carbon monoxide.
Warnings about hazardous voltage, shock, grounding, and noise risks.
Lists parts and part numbers for generator sets.
Identifies manuals and literature available for generator sets.
Overview of specifications and reference to other manuals.
Details on alternator, excitation system, and PMG advantages.
Visual identification of generator set components.
Provides remote monitoring capabilities for generator status.
Senses output current to shut off AC voltage regulator.
Interrupts generator output on overload or short circuit.
Controls auxiliary devices during generator operation.
Steps to perform before starting the generator set for satisfactory operation.
Procedure for weekly operation under load for one hour.
Details operation of the controller, including prime power mode.
Overview of the expanded controller's indicators and functions.
Overview of the standard controller's indicators and functions.
General precautions and procedures for maintenance tasks.
Schedule of maintenance tasks based on operating hours or time.
Maintenance of the generator set's cooling system.
Steps to prepare the generator set for storage.