EasyManuals Logo

Kohler Command PRO EFI ECV940 User Manual

Kohler Command PRO EFI ECV940
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
62 590 18 Rev. D
KohlerEngines.com
EN
Maintenance Instructions
WARNING
Before working on engine or equipment, disable
engine as follows: 1) Disconnect spark plug
lead(s). 2) Disconnect negative (–) battery cable
from battery.
Accidental Starts can cause
severe injury or death.
Disconnect and ground spark
plug lead(s) before servicing.
Normal maintenance, replacement or repair of emission control devices and systems may be
performed by any repair establishment or individual; however, warranty repairs must be performed
by a Kohler authorized dealer found at KohlerEngines.com or 1-800-544-2444 (U.S. and Canada).
Oil Recommendations
All-season KOHLER
®
PRO 10W-50 Synthetic
Oil is the ideal oil for KOHLER engines. It is
speci cally formulated to extend the oil and oil
lter change interval to 300 Hours when paired
with a KOHLER PRO Extended Life Oil Filter.
300-Hour oil and oil lter change intervals are
exclusive to and only authorized on KOHLER
engines that utilize both the KOHLER PRO
10W-50 Synthetic Oil and KOHLER PRO
Extended Life Oil Filter. Alternative engine
oils and oil lters may be used with KOHLER
engines but require 100-Hour oil and
200-Hour oil lter change intervals for proper
maintenance. Oil must be API (American
Maintenance Schedule
Weekly
Check lter minder.
Every 25 Hours or Annually¹
Service/replace low-pro le precleaner.
Every 100 Hours or Annually¹
Change oil. Oil lter is recommended.
Remove cooling shrouds and clean cooling areas. Inspect for any debris visible through
ywheel cooling holes (if equipped) and clean as necessary.
Every 150 Hours¹
Check heavy-duty air cleaner element.
Replace low-pro le air cleaner element.
Replace unique Electronic Fuel Injection (EFI) fuel lter.
Check oil cooler ns, clean as necessary.
Every 200 Hours
Change oil lter.
Every 300 Hours
Replace heavy-duty air cleaner element and check inner element.
Every 300 Hours
2
Change oil and lter (KOHLER PRO 10W-50 oil and KOHLER PRO lter only).
Every 500 Hours or Annually¹
Replace spark plugs and set gap.
Every 600 Hours
Replace heavy-duty inner air cleaner element.
1
Perform these procedures more frequently under severe, dusty, dirty conditions.
2
Option only if using KOHLER
®
PRO oil and PRO lter.
Petroleum Institute) service class SJ or higher.
Select viscosity based on air temperature at
time of operation as shown below.
°F
-20
020324060
50 80 100
°C
-30 -20
-10 0
10 20 30
40
10W-30
5W-30
SAE 30
20W-50
KOHLER PRO 10W-50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kohler Command PRO EFI ECV940 and is the answer not in the manual?

Kohler Command PRO EFI ECV940 Specifications

General IconGeneral
Fuel SystemElectronic Fuel Injection (EFI)
LubricationFull pressure lubrication with full-flow filter
Cooling SystemAir-cooled
Governor TypeMechanical
StarterElectric
Spark Plug Gap0.030 in. (0.76 mm)
Displacement999 cc
Bore90 mm
Oil Capacity2.0 quarts (1.9 liters)
Horsepower38 hp
Ignition SystemElectronic
Alternator20 amp
Fuel Tank CapacityExternal Tank Required

Related product manuals