NOTICE: Adequate oor support is required. Standard 2x6 lumber is NOT sucient
for this application.
NOTE: The wood support must be a minimum of 2″ (51 mm) thick by 6″ (152 mm)
wide.
NOTE: Concrete can be used as the oor support, as long as the faucet base will be
below the nished oor level.
Plan out the bath ller placement based on the dimensions above.
Cut a hole in the suboor that is large enough to install the wood support
between two oor joists.
Secure a wood support located 2-1/4″ (57 mm) to 3-1/16″ (78 mm) below the top of
the nished oor.
Kohler Co. 5
1443292-2-B